| |
 |
| |
Listed below are SMD's standard shop tolerances:
- Laser Cut: +/- .005"
- Shear: +/- .032" linear, +/- .062" diagonal
- CNC Punching: +/- .005" hole to hole
- Punch, Notch, Bend: +/- .032"
- Angle: +/- 1 degree
- Weld: +/- .062"
- Material Range: we can laser cut from .005" thick mild steel to 1" thick mild steel. We can plasma cut up to 2" thick mild steel.
- Material Types: mild steel, aluminum, stainless steel, galvanized, galvannealed, and more.
To make a better decision about what materials to use on your project visit our friends at:
 |
| MakeItFrom.com -
MakeItFrom.com is a material information
resource focused on serving design engineers and product designers in the
process of material selection. You know what you want to make. Now find the best
material to make it from. |
|
|
- Standard Materials Available (typically in stock):
| MATERIAL THICKNESS & TYPE |
| 0.005 " MILD STEEL | | 0.006 " MILD STEEL | | 0.008 " MILD STEEL | | 0.010 " MILD STEEL | | 0.012 " MILD STEEL | | 0.015 " MILD STEEL | | 0.5 MM MILD STEEL | | 1.0 MM MILD STEEL | | 2.0 MM MILD STEEL | | 3.0 MM MILD STEEL | | 5.0 MM MILD STEEL | | 7 GA MILD STEEL | | 10 GA MILD STEEL | | 11 GA MILD STEEL | | 12 GA MILD STEEL | | 14 GA MILD STEEL | | 16 GA MILD STEEL | | 18 GA MILD STEEL | | 20 GA MILD STEEL | | 22 GA MILD STEEL | | 1/4 " MILD STEEL | | 3/8 " MILD STEEL | | 1/2 " MILD STEEL | | 5/8 " MILD STEEL | | 3/4 " MILD STEEL | | 1 " MILD STEEL | | 16 GA STAINLESS STEEL TYPE 304 | | 18 GA STAINLESS STEEL TYPE 304 | | 20 GA STAINLESS STEEL TYPE 304 | | 14 GA STAINLESS STEEL TYPE 304 | | 12 GA STAINLESS STEEL TYPE 304 | | 11 GA STAINLESS STEEL TYPE 304 | | 10 GA STAINLESS STEEL TYPE 304 | | 7 GA STAINLESS STEEL TYPE 304 | | 22 GA STAINLESS STEEL TYPE 304 |
- Special Order Material: We can special order the material you need. Please call for more information!
If you require a tighter tolerance than what we have listed above, please call to place a special order.
Click here to view our contact information.
|
|
|
Click on a shim type to order!
|
